Pneumatic press machine manufacturer and supplier with Pressmachine-World? Yingxin World Press Machine Company has exporting center in Shanghai with professional team to follow up logistic and document process, which also saves a lot of time in middle process. More than 65 years experiences focusing on producing power press machines. Find more details at power press machine. Working together for customer success. Since the foundation of the Yinxin world press machine company, one of the foundation principle has been to work closely with our customers. This provides the opportunity to continually assess and improve the levels of service we offer and to create the most innovative products available.

The repeatability of the slider of the CNC bending machine is 0.0004 inches, and the precise angle of forming must use suchprecision and a good mold. Therepeatilty of the lder o the hand-controlled bending machine is +0.002 inches, and the deviationo t2-3 is geneally generated under the condition of using a sutable mold. In addition, the Cc bending machine is ready for rapid mold assembly. When many small batches of parts need to be bent, this is an indisputable reason for consideration.

Main features: Adopt all-steel welded structure, with sufficient strength and rigidity; Hydraulic drive, the oil cylinders at both ends of the machine tool are placed on the sliding block to directly drive the sliding work; The slider synchronization mechanism adopts torsion shaft for forced synchronization; Using mechanical block structure, stable and reliable; The stroke of the slider can be adjusted quickly by motor, fine-tuned manually, and the counter is displayed; Oblique wedge-type deflection compensation mechanism to ensure higher bending accuracy.

As far as free bending is concerned, punch and die are procese at 85 or les (saler i better). When using this set of molds, pay attention to the ga beteen the male mold and the female mold at the bottom of the stroke, and the excessive bending that is sufficient to compensate for the springback and keep the material at about 90°. Generally, the springback angle of the free bending die on the new bending machine is s2, and the bending radis is equa to 0.156 times the opening distance of the die. For the bending of bottomed concave molds, the mold angle is generally 86 ~ 90°. At the bottom of the stroke, there should be a gap slightly larger than the thickness of the material between the male and female molds. The forming angle is improved because the bottomed die has a larger bending tonnage (about 4 times that of free bending), which reduces the stress that usually causes springback in the bending radius.

Aluminum and high-strength steels, for example, place special demands on the individual processing steps. One factor that has a major influence on the quality of the end product is the straightening of the respective metal. In a straightening machne consisting of several stagered straighngos,the coilcrvatre o the starting matril is elmnated. In adition, any edge or centre waves in the strip material can be compensated for, using suitable machines. The aim here is to achieve the lowest possible and most homogeneus resiu sres state in order to maintain te flatness of the material during subsequent cutting processes. n lentr mesur fo th eciecy of a straighten roessis te dere of platification of the respective metal, which describes the proportio o he material os-section that is plastically deforme uring straightening. With the same yield strength and material hickness, aluminum requires significantly greater degrees of deformation than steel to achieve comparable plastification. See even more details at https://www.pressmachine-world.com/.