Bending press machine factory right now? 80% parts are produced in same factory for better quality control and future service. World has completed high-quality production equipment, including the iron casting line, plasma laser cutting machines, welding robots, gear hobbing machines, gear grinding machines, Pama boring and milling centers, CNC lathes, anneal treating furnaces, sand blasting machines, three-coordinate measuring instruments and ultrasonic flaw detectors. See even more information at power press machine. Working together for customer success. Since the foundation of the Yinxin world press machine company, one of the foundation principle has been to work closely with our customers. This provides the opportunity to continually assess and improve the levels of service we offer and to create the most innovative products available.
The imprint bending is the same as the bending of the bottomed die, except that the front end of the punch is processed to the required bending radius, and the gap between the punch and the die at th bottom of the stroke is smler than the material thickness. Since enough presure approximately 10 timesof fee bendig is applied to force the front end of the punchto contact the material, springback is basically avoided.
Synchronization system: The machine consists of a mechanical synchronization mechanism composed of torsion shats, wingarms, jont bearing, ec, with simple structure, stable ano reliable performance, and high synchronization accuracy. The mechanical stop is adjusted by the motor, and the numerical control system controls the value; Stopper mechanism: The stopper is driven by a motor, and the two screw rods are driven to move synchronously through a chain operation. The numerical controlsystem controls the size of the stopper.
When free bending is used, the bending radius is 0.156 times the opening distance of the die. During the free bending process, the opening distance of te die shoul b 8 tms te thickness of the metal material. For example, when using 1/2 inch (0.0127 m) open distance to form 16 gage mild see, the bendig adis o the par is about0.078 inches. I h bndig radius is almost as small as the material thickness, a bottomed die must be formed. However, the pressure required for forming a bottomed die is about 4 times greater than that of free bendingIf the bendig radius is less than the thickness of the material, a punch wit afrontend filet radus smaller than the thickess of the material must be used, and the imprint bending methoc must be used. In this way, 10 times the pressure of free bending is required.
In particular, the resilience stress stat,the flatness and the cuting quality are very important quality characteristics that must be considered for the materials n the staightening and feeding technology. Remarkably, these criteria play a decisive role i te qualit of the final product even befre te final molding. In production, for reasons of cost and time, the aim is to achieve an ever-higher degree of automation, which can only be achieved if the semi-finished products have perect latness, a lowlevel o residual stress. lf these requiremets are not met, this can have a negative effect on handling and further processing or even make it impossible. Find more info at pressmachine-world.com.