Best double planer machine supplier: The most common application involves gluing a coating (veneer, laminate, composite, PVC etc) onto a substratum (MDF, hardboard, plywood, hollow panels, blockwood etc). The basic configuration of the pressing line is comprised of a feed belt, an automatic press and a discharge deck. This configuration can be completed with numerous options, such as glue spreaders, polishers, automatic feeders, disk, roller or belt conveyors, automatic assembling stations, panel turners and stackers. Lines with various degrees of automation can be supplied right up to fully automatic lines that do not require direct intervention by the operator. Read additional info at double side planer.

Cross cut saws are perfect when you need to cut across the grain. There are two choices, a blade above the table coming across the wood, or a blade underneath that comes up through the table. The cross saw with the blade underneath the table keeps the blade at a greater distance from the user so is considered safer. It can also be automated with an automatic feed system which allows you to safely cut multiple pieces in one go, which can be more efficient. Jigsaws are best for cutting tight curves, angles and intricate shapes. Blades for jigsaws are short and straight. They’re clamped at the top and bottom and cut in a reciprocating up and down motion.

Presses have advanced over the past decade, enabling manufacturers to improve their efficiency and flexibility. Typical woodworking presses provide different solutions, such as heated, cold, vacuum, or frame and if you can’t find exactly what you need V-hold Machinery can design and make a machine for you. Presses that operate plane to plane are called platen presses. Virtually any component that goes into a wood or composite panel construction can be manufactured in a process utilising a cold or hot platen style press. Hop presses use heating platens or rollers, heated with steam, oil or electricity. Cold presses use ambient platens, or rollers to generate force. The amount of temperature, pressure, time and moisture content all factor into how the process works.

A jointer is used for planing straight edges and surfaces of boards. In practice, it performs the work of a hand planer and is capable of producing a true surface with sufficient accuracy and speed. In consists of a frame, table, feed rollers, revolving head fitted with two or three cutter knives. With the help of feed rolls, the plank is fed to the cutter head which removes the wooden chips as the board advances and makes its surface smooth and plane. By means of an adjustable fence, the jointer can also be used for angular and level cuts. A jointer is specified by the length of the cutting blade.

Probably the second most important of single woodworking machines in a carpentry shop is the circular saw. It can be used for ripping, cross cutting, mitering, beveling, rabbeting, and grooving. Although there are many types of circular saws such as universal saw, variety saw, bench saw, the basic working parts are common to all. Each has a flat surface or table upon which the work rests while being cut, a circular cutting blade, cut-off guide, and a ripping fence that acts as a guide while sawing along the grains of the wood. The circular saw usually has provisions for tilting the table upto an angle of 45° to enable the machine to cut at different angles required during mitering, levelling, etc. The size of a circular saw is determined by the diameter of the saw blade.

The wood is fixed between the headstock and tailstock of the lathe. The headstock houses the motor that spins the work-piece. The tailstock is adjustable, moving along the length of the bed to fit work-pieces of various lengths. Once the work-piece is locked in place, the tool rest is set into position. The spinning work-piece is then shaped using a chisel or gouge held fast to the tool rest. Face-plate turning, in with the work-piece is fastened with screws to the face plate of the drive spindle, allows the woodworker to produce bowls and other hollow goods. Discover additional information at https://www.v-holdmachinery.com/.

Founded in 1996, V-HOLD have more than 20 years of professional four-sided plane production, to create China’s four-sided plane first brand and commits itself to provide the most secure, reliable, efficient, energy-saving, economical production equipment for the customers around the world. Nowadays, most of the products including 4-Side Moulder, Multiple Rip Saw, Multiple Rip Saw with Double Side Planner, and Automotive Floor Production Line have passed ISO9001: 2000 quality system.