Searching to purchase some top quality double split loom tubing? Here are some advices and extra details helping you to make the best pick. There are seven different types of conduit used commonly in residential and light commercial wiring. Rigid metal conduit, or RMC, is heavy-duty galvanized steel tubing that is installed with threaded fittings. It is typically used outdoors to provide protection from damage and can also provide structural support for electrical cables, panels, and other equipment. RMC is sold in 10- and 20-foot lengths and has threads on both ends.

Electrical metallic tubing, or EMT, is the most common type of conduit for exposed interior installations, such as in a basement or an unfinished garage or workshop. It is the lightest and thinnest of the rigid metal conduit types and comes in a few different diameters; 1/2-inch is the most standard size for household circuits. EMT is also called “thin-wall” and is relatively easy to bend with a tool called a conduit bender. EMT is permitted by the National Electrical Code (NEC) for dry and wet locations but requires special watertight fittings and connectors in wet locations. With proper installation, EMT raceway can serve as a circuit ground path and be used in place of a separate ground wire running inside the conduit.

The general procedure for using thin wall conduit is similar to the use of steel armor cable. The big difference is that conduit cannot be “snaked” through openings in ceilings and walls. You must have full access to joists and studs to install electrical conduit. So you probably won’t want to use it unless your local code requires it. IMC is typically used in hazardous locations, and in its stainless steel formulation, IMC is widely used in the food and beverage industry, in chemical plants, in cosmetic and pharmaceutcial industries, in refineries, in pulp and paper mills, in marine and coastal sites, in other corrosive environments. An advantage of IMC is its larger interior diameter compared with RMC of the same nominal sizes, making it easire to pull wires. See even more information at SS flexible conduit.

The liquid tight flexible metal conduit (LFMC) is a versatile choice that is not only effective at protecting the wires from damage, but additionally gives reliable waterproof protection. As a way to offer the waterproofing protection, the conduit is coated by using a special jacket that only fits over the top of the the metal. This implies the LFMC great to make use of in any environment, including those areas which may experience difficulties with damp.

There are strict regulations in dealing with the fill factor. A cross-sectional area of the conductors inserted would be measured and the code would determine the percent of conduit which could be filled. A conduit can never be filled 100 percent as it is not safe. The code has determined how wires and bundles of wires can safely run through a given flexible conduit. The table does not address any difference in high or low voltage cables so you can apply the table for both uses. Have this information readily available when shopping for conduits.

CorrugatedConduit.com offer a wide selection of corrugated plastic flexible conduit and flexible metal conduit to fit your needs. All of our flexible conduit meet ROHS, SGS specifications as durable and are resistant to low level acides and alkalis. These flexible conduit are also designed for wire and cable protection well. Here are you can find a full sizes of all kinds of plastic & metal flexible conduit. Whether your application requires plastic conduit, split conduit, metal conduit and other applications. You will find what you need here. Find additional information on corrugated conduit.