Sanding & Buffing: Encore robotic sanding and buffing systems utilize the Encore multi-headed tool as well as off the shelf sanding equipment to provide robotic sanding and/or buffing to the full exterior surface of vehicles as well as vehicle components/parts: The Encore system integrates automatic paper changers to remove, replace and validate paper changes. Dust removal systems can also be integrated to remove residual material left behind the sanding process. Encore systems offer automatic tool change capabilities to provide additional flexibility for the sanding process. When combined with defect detection the entire process of seek and finesse can be totally automated.
TKS can offer both automated and manual sealer solutions. Turnkey automated solutions include robots, vision systems, vehicle model ID, material supply systems, and applicators in addition to the standard spray booths with downdraft HVAC. Every paint shop is different. TKS offers each paint system as an independent module, so each customer can mix and match to meet their requirements. We specialize in providing custom designs & custom engineering for each client for each vehicle. We are a full-service design-build industrial contractor.
From High-pressure water sprays to De-greasing to Surface Conditioner and Phosphate, and now, Metal Oxide Pretreatment for Aluminum bodies, TKS offers up to 10 different process steps to configure for your application. TKS’ electrical engineering department works with many manufacturers including Spang, Controlled Power, and more. TKS provides a variety of types of anodes: solid, flushing, roof-, wall-, and floor-mounted. We also design and provide the anolyte system. A properly sized and maintained UF system is key to a clean e-coat finish. Along with our patented counterflow innovation, TKS offers a cost-effective ED system. See even more information at paint booths by TKS.
TKS provides superior spray booth environments to achieve a high-quality paint finish with a wet or dry scrubber. We have recently updated our Dry Booth design to reduce maintenance and decrease operating costs via less limestone and less energy usage. Our wet booth scrubbers has been installed over 100 times worldwide.
TKS designs and builds several industrial ovens for paint drying and paint cure, including: ED oven, Sealer oven, Primer oven, and Topcoat (TC) Oven. These industrial ovens can operate for 30+ years with typical oven burner and fan maintenance. The oven is typically preceded by a setting tunnel to allow the solvent-borne clear coat a few minutes to flash in a controlled room temperature environment prior to entering the oven’s first heat-up zone where the water within the waterborne paint begins to flash off.
Integrity is in the forefront of our every business endeavor. How we are perceived by our customers, suppliers and associates will determine our future. Also, how we achieve our goal is as significant as the goal. Therefore, we will conduct ourselves in such a manner as to convey our credo of honesty, fairness and ethical behavior. Discover additional information at paint booth.