Best led street light factory: Buyers must thoroughly consider the LED roadway light case design before purchasing. An intelligent design can prevent various failure scenarios, such as water entrapment, grounding, and heating. The material used as LED roadway light casing should be consecutive to dissipate heat and have holes to allow water to drain in case water finds its way into the circuit boxes. Grounding is also necessary to avoid electric shock and can be required by any local regulating body. See even more details on led street light manufacturers.

The Ingress Protection (IP) is a set of international ratings that tells how much an electrical device is dust and water-resistant. For example, an IP65 rating means the device is dust-resistant and can protect itself against water splashes. The IK ratings are a set of international standards that define the degree of protection for an electrical enclosure against external mechanical impacts. The numeric representation of the IP/IK rating is from 0-10. A higher IK08 rating means the electrical flood light can withstand physical shocks. Having a solid IP/IK rating is vital for installation in a public place. Manufacturers refer to a flood light’s lifespan in terms of working hours (h). Working hours depend on multiple factors, including the type of lamp and the weather conditions in which it is installed. LED-type floodlights offer the most working hours, up to 50,000 hours.

Split System Solar Street Lights – The initial design of solar streetlights was the split system, which was cost-effective and functional. Its simple approach with separate components allows for easy replacement and upgradation. Compared to modular designs, the split system approach takes up more space and has a visible bulkiness to the aesthetics. Replacing components of the split solar street lights is more convenient. The use of non-specialized components allows for modifications within the budget. The buyer is not restricted to using components from the same manufacturer. However, it does have longer installation time and wiring complexities than the modular design approach.

Tube Lighting is also commonly known as LED fluorescent tube, LED tube lamp, etc, and its light source uses LED as the illuminator. The traditional fluorescent tube is also called a fluorescent lamp. There is a filament at each end of the lamp. The tube is filled with a small amount of argon and thin mercury vapor. The inner wall of the tube is coated with phosphor, and the gas between the two filaments emits ultraviolet light when it conducts electricity. Let the phosphor emit visible light. Due to the heavy metal pollutant “mercury”, the environmental pollution of scrapped fluorescent tubes is very serious.

CHZ Lighting helps customers choose the most appropriate led lighting products and offer corresponding technical supports after understanding their overall needs. Customers only need to provide us with some basic engineering information. (Take led street light as an example, the information customers need to offer includes road width, pole height, pole position, pole spacing, average illumination requirement, etc.) Based on the provided information, our designers can then use Dialux simulate lighting effects and offer multiple design options to customers.

Because the LED garden lamp has the characteristics of versatility, aesthetics, landscaping and decorating the outdoor environment, it is also called landscape LED garden lights. It has the characteristics of energy-saving and high efficiency. It is mainly used for lighting up the urban slow lanes, narrow lanes, residential quarters, tourist attractions, public places such as parks and plazas, which can extend the time people spend in outdoor activities and improve the safety of properties. Applicable occasions: Widely used in urban roads, parking lots, bicycle lanes, gardens, plazas, residential areas and other outdoor venues.

Solar Street Lighting Advantages: No need to lay cables, no AC power supply, no electricity charges; DC power supply, light-sensitive control; good stability, long life, high luminous efficiency, easy installation and maintenance, high safety performance, energy-saving, economical and practical. Solar Powered Street Lights are widely used in urban main and secondary roads, residential areas, factories, tourist attractions, parking lots and other places. Discover even more details at https://www.chz-lighting.com/.

Street lights or street lamps are helpful as they illuminate roadways, parking lots, sidewalks, and other public areas where people gather. Apart from improving driving safety, street lights also enhance the security of a site by improving vision in poor light conditions. Most of these street lights are often used with other traffic safety equipment that enhances visibility and removes all the obstacles in darkened areas. You need to understand that the primary function of street lights is to illuminate rooms or objects that would otherwise be in darkness or out of focus, especially at night.

Rust prevention of LED street light poles: The problem of rust prevention of street lamp poles is also very important. The main methods are hot-dip galvanizing, cold galvanizing, and plastic spraying. Hot-dip galvanizing is recommended. This can prevent serious corrosion of the exterior of the light pole, and can make the street light use for a longer time. The waterproofing of LED street lights directly affects the service life of street lights. In order to avoid additional maintenance work and high maintenance costs in the later period, we must pay special attention to the waterproof problem of the lamps. The first thing to do is to find a manufacturer with a good reputation and good after-sales service to eliminate unnecessary problems and troubles in the product.

CHZ Lighting is a professional lighting manufacturer integrating production and sales. With more than 10 years of lighting experience, we provide our customers with high quality LED lighting products and lighting solutions. Our products include street lamps, solar street lamps, floodlights, factory lights, garden lights, tri-proof lights, panel lights and tube lamps. We have assisted customers in Europe, America, South America, Southeast Asia, Africa and other countries to successfully complete roads and highways. Parking lots, airports, terminals, factories, shopping malls, shops, squares and other lighting projects have won wide acclaim from customers. By comparing product quality, actual energy saving after use, professional and timely communication process, and after-sales service, they have recognized the advantages of our company and deepened their loyalty. Hope to provide quality services to more customers, welcome to visit our company.