Best tensile testing machine manufacturer? GESTER instruments is a national high-tech textile testing equipment manufacturers engaged in R&D and production of high precision physical properties textile testing instruments with 22 years experience, expertly specialized in providing integrated laboratory testing solutions for children’s products, textile, footwear and furniture. It has passed ISO 9001 certificate, “AAA Enterprise in Quality, Service and Credit” and was audited as SGS audited supplier. See even more details on textile testing machines.
Temperature humidity chambers (also known as climatic or climate test chambers) simulate the effects that a range of temperature and humidity conditions have on a product or material, for example telecommunications equipment or photovoltaic solar panels that are exposed to outdoor temperature and humidity testing conditions. They have applications in industries as disparate as food science, semiconductors, and military quality assurance. A good temperature humidity chamber is essential for evaluating potential success or failure of a product in the field. A climate test chamber can also be used when constant climate conditions (temperature and/or humidity) are needed for product testing. The main function of environmental testing chambers, is to test the behavior of the products we use every day, in extreme climatic conditions. Temperature And Humidity Test Chamber For conditioning of samples prior to testing. It also can be used for a variety of materials of high – low temperature alternating test. The test temperature, humidity and time can be programmed.
Correct use of computerized universal testing machine: Make sure all wiring is correct before the tensile testing machine is operated and preheat for at least 15 minutes to package the stability of the sensor. According to the test, the position of the upper and lower limit blocks is reasonably set to prevent the instrument from running over the stroke and causing damage to the fixture and the sample. When pressing the fast up button or the fast down button, do not put your hand between the moving beam and the fixed specimen, fixture or test device to avoid injury.
This bursting strength tester use pneumatic method, meet multinational standards and equipped with several changeable test clamp. The simple interface touching screen controller is easy and simple to handle. The specimen was clamped firmly by the pneumatic force which can also save effort. The test cover was made up of high-transparent glass with LED light inside which can observe the specimen easily. The Bursting Strength Testing Machine can induct the burst automatically which is much more sensitive and reliable. The bursting distension can go up to 75mm.
The principle of testing that you should know: Stitch the sample with one or two pieces of specified multi-fiber adjacent fabric, which is placed in soap solution or other washing solution, mechanically stirred at the specified time and temperature, cleaned and dried. Taking the original sample as the reference sample, assess the discoloration of the sample by the left gray scale, and then assess the color stain of the adjacent fabric by the right gray scale. See additional info at gesterinstruments.com.
ASTM D4060 Taber Abrasion Tester Uses and Factors to Be Considered: Taber Abrasion is used for measuring the wear resistance of organic coatings applied flat, rigid test samples. ASTM D1044 is used for transparent plastic materials to evaluate their capacity to maintain their optical properties, upon typical, wear to be expected while in service. Abrasion resistance to Taber Abrasion is usually measured as a weight or a coating thickness loss after a given number of cycles. Each arm, by default, is loaded to apply a 250 g. pressure on each wheel. Depending on the product/specification used, this weight can be increased to 500g or 1000g. The abrading wheels are available in different grit for a more or less abrasive action.